new original warranty: one year in stock sophia@swanautomation.com
View Morenew original warranty: one year in stock sophia@swanautomation.com
View Morenew original warranty: one year in stock sophia@swanautomation.com
View Morenew original(warranty: one year ) in stock sophia@swanautomation.com
View MoreAllen Bradley 20F11NC030AA0NNNNN PowerFlex 753 Frequency AC drive The 20F11NC030AA0NNNNN built by Allen Bradley (AB) is a 15 kW module. This VAC drive includes optional communication slot built-in, is a 400VAC/540V DC VFD, and has an IP20/IP00 (NEMA UL Type Open) enclosure type. Also, it has an amperage output rating of 30 Amp. Furthermore, it comes with a dynamic brake included in the VFD in case braking is required. Additionally, this Rockwell Automation frequency drive has no HIM unit included, instead the drive comes with a plastic cover.
View MoreAllen Bradley 20F11NC022JA0NNNNN PowerFlex 753 Frequency AC drive The Allen-Bradley 20F11NC022AA0NNNNN drive is an air-cooled drive with an open enclosure. It is part of the PowerFlex 753 drive series. The 20F11NC022AA0NNNNN operates with 400 Volts AC and 540 Volts DC voltage.
View MoreAllen Bradley 20F11NC022AA0NNNNN PowerFlex 753 Frequency AC drive The Allen-Bradley 20F11NC022AA0NNNNN drive is an air-cooled drive with an open enclosure. It is part of the PowerFlex 753 drive series. The 20F11NC022AA0NNNNN operates with 400 Volts AC and 540 Volts DC voltage.
View MoreAllen Bradley 20F11NC015JA0NNNNN PowerFlex 753 Frequency AC drive The Allen-Bradley 20F11NC015AA0NNNNN drive is a PowerFlex 753 series drive. It is rated for 400 Volts AC or 540 Volts DC nominal voltage. It has an operating current rating of 15.4 Amps.
View Morenew original( warranty: one year) in stock
sophia@swanautomaiton.com
Item NO.:
IC200MDL650Order(MOQ):
1Payment:
T/T wire transfer , Western UnionProduct Origin:
USAColor:
NewShipping Port:
HK Shanghai Shenzhen GuangzhouLead Time:
3 days (if in stock)IC200MDL650
IC200MDL650
IC200MDL650
Contact detail:
Mobile/ WeChat/ WhatsApp:+86-17354319552
E-mail:sophia@swanautomation.com
Skype: sophia_9090@163.com
QQ: 2747366625
Contact: Sophia
Main business:
Our company sells large-scale imported spare parts for various DCS system modules. Main products: DCS distributed control system, PLC programmable controller, numerical control system, (CPU processor, module, card, controller, servo drive, workstation, driver, motor, memory card, power supply, robot spare parts, etc.) Various industrial control products
◆ Invensys Triconex
◆ Schneider
◆ Indramat
◆ Forboro
◆ Woodward
◆ Westinghouse
◆ Rockwell Allen-Bradley
◆ Schneider Modicon
◆ ABB
◆ Siemens
◆ Bently
◆ Honeywell
◆ GE FANUC
◆ Yaskawa
Shipping & Payment:
1.Shipping will be made via DHL,TNT,EMS,FedEx or USP .
If you would like to use your shipping account number please contact us with that information.
2.We Ship after receiving payment from the buyer.
3. All the goods will be tested before shipment ,we will track the goods until you received.
4.Payment: T/T Western Union
5.New original with one year warranty
Feedback:
We want our customers to be completely satisfied with their purchase. If anything about your transaction is not your satisfaction. Please contact us before leaving Feedback. It gives both the parties the chance to get positive trading experience in future.
IC695CPU310 | IS200WETBH1B |
IC695CRU320 | IS200AEADH1A |
IC695ETM001 | IS210AEBIH3B |
IC694BEM331 | IS215AEPAH1A |
IC694MDL645 | IS215AEPCH1B |
IC694MDL740 | IS210AEPSG1B |
IC694MDL655 | IS215WETAH1C |
IC694APU300 | IS200WETBH1B |
IC694MDL753 | IS215WECAH1A |
IC694BEM331 | IS200WEORG2ABC |
IC695PBM300 | IS210AEPSG1B |
IC698CPE020 | IS215WETAH1C |
IC698CRE030 | IS200WETBH1B |
IC698CPE010 | IS215AEPCH1B |
HE693STG884D | IS215WETAH1C |
IC693ALG391C | IS200WETBH1B |
IC693ALG391B | IS210AEAAH1BJE |
IC693CMM301G | IS210AEBIH1BEA |
IC693CMM301F | IS215AEPAH1AF |
IC693CMM302F | IS215AEPCH1ABC |
IC693PWR321Z | IS210MACCH2AGG |
IC693MDL240F | IS215AEPAH1AF |
IC693MDL940K | IS215AEPCH1ABC |
IC697PWR711J | 1S210AEAAH1BJE |
IC69CPU782E | IS210AEBIH1BEA |
IC697BEM711M | IS210AEAAH2B |
IC697ALG440B | IS215AEPCH1B |
IC697ALG230 | IS210AEPSG1B |
IC697MDL340G | IS215WEMAH1B |
IC697MDL250G | IS215WETAH1C |
IC697MDL250F | IS215AEPAH1A |
IC697MDL250K | IS215AEPCH1B |
IC697MDL653F | IS215WETAH1C |
1. The composition of PLC
From the structure point of view, PLC is divided into two types: fixed type and combined type (module type). Fixed PLC includes CPU board, I/O board, display panel, memory block, power supply, etc. These elements are combined into a non-removable whole. Modular PLC includes CPU modules, I/O modules, memory, power modules, backplanes or racks. These modules can be combined and configured according to certain rules.
2. The structure of the CPU
The CPU is the core of the PLC and functions as the nerve center. Each set of PLC has at least one CPU. It receives and stores user programs and data according to the functions given by the PLC system program, and collects the data sent by the on-site input device by scanning. The status or data is stored in the specified register, and at the same time, the working status of the power supply and the PLC internal circuit and the syntax error in the programming process are diagnosed. After entering the operation, the instructions are read one by one from the user program memory, and after analysis, the corresponding control signals are generated according to the tasks specified by the instructions to command the relevant control circuits.
The CPU is mainly composed of arithmetic units, controllers, registers and the data, control and status buses between them. The CPU unit also includes peripheral chips, bus interfaces and related circuits. Memory is mainly used to store programs and data, and is an indispensable unit of PLC.
In the eyes of the user, it is unnecessary to analyze the internal circuit of the CPU in detail, but there should be enough understanding of the working mechanism of each part. The controller of the CPU controls the work of the CPU, which reads instructions, interprets instructions, and executes instructions. But the working rhythm is controlled by the oscillating signal. The arithmetic unit is used to perform digital or logical operations and work under the command of the controller. The register participates in the operation and stores the intermediate result of the operation. It also works under the command of the controller.
CPU speed and memory capacity are important parameters of PLC. They determine the working speed of PLC, the number of IOs and software capacity, etc., so they limit the control scale.
3. I/O module
The interface between the PLC and the electrical circuit is completed through the input and output part (I/O). The I/O module integrates the I/O circuit of the PLC, and its input register reflects the state of the input signal, and the output point reflects the state of the output latch. The input module transforms the electrical signal into a digital signal and enters the PLC system, while the output module is the opposite. I/O is divided into digital input (DI), digital output (DO), analog input (AI), analog output (AO) and other modules.
On-off value refers to a signal with only two states of on and off (or 1 and 0), and analog value refers to a continuously changing amount. Commonly used I/O classifications are as follows:
Switch quantity: according to the voltage level, there are 220VAC, 110VAC, 24VDC, according to the isolation mode, there are relay isolation and transistor isolation.
Analog quantity: According to the signal type, there are current type (4-20mA, 0-20mA), voltage type (0-10V, 0-5V, -10-10V), etc. According to the accuracy, there are 12bit, 14bit, 16bit, etc. .
In addition to the above-mentioned general IO, there are special IO modules, such as thermal resistance, thermocouple, pulse and other modules.
Determine the module specifications and quantity according to the number of I/O points. I/O modules can be more or less, but their maximum number is subject to the ability of the basic configuration that the CPU can manage, that is, limited by the maximum number of backplanes or rack slots.
4. Power module
PLC power supply is used to provide working power for the integrated circuits of each PLC module. At the same time, some also provide 24V working power for the input circuit. The power input types are: AC power (220VAC or 110VAC), DC power (24VAC is commonly used).
5. Bottom plate or rack
Most modular PLCs use backplanes or racks. Their functions are: electrically, realize the connection between each module, so that the CPU can access all the modules on the backplane, and mechanically, realize the connection between the modules, so that the modules form a whole .
Related Tags :
Copyright © 2024 Wuhan Xiatong Automation Equipment Co., Ltd.. All Rights Reserved. / XML / Privacy Policy