Allen Bradley PLC,1756-L72,Allen Bradley ControlLogix

Allen-Bradley 1734-EP24DC
Allen-Bradley 1734-EP24DC The Allen-Bradley 1734-EP24DC is a POINT I/O Expansion Power Supply. It has 24 Volts DC Field Power and a Inrush Current of 6 amps for 10 milliseconds with Reverse Polarity Overvoltage Protection. This Expansion Power Supply has a 10 amps Power Supply Current.
- AB 1734-EP24DC
- 1734-EP24DC
- Rockwell 1734-EP24DC
View More
Allen-Bradley 1734-CTM
Allen-Bradley 1734-CTM The Allen-Bradley 1734-CTM is a POINT I/O Terminal Module. It has 250 Volts Continuous Isolation Voltage and a Field Power Supply of 1-28.8 Volts DC or 12/240 Volts AC with an Field Power Supply Current of 4 amps/module.
- AB 1734-CTM
- 1734-CTM
- Rockwell 1734-CTM
View More
Allen-Bradley 1734-ARM
Allen-Bradley 1734-ARM The Allen-Bradley 1734-ARM is a POINT I/O ARM Module. It has 75 milliamps POINTBus Current and a Thermal Dissipation of 0.375 Watts with an Power Dissipation, Max of 1.3 BTU/hour.
- AB 1734-ARM
- 1734-ARM
- Rockwell 1734-ARM
View More
Allen-Bradley 1734-APB
Allen-Bradley 1734-APB The Allen-Bradley 1734-APB is a POINT I/O PROFIBUS DP Network Adapter. It has 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This PROFIBUS DP Network Adapter has a 1000 milliamps POINTBus Current.
- AB 1734-APB
- 1734-APB
- Rockwell 1734-APB
View More
Allen-Bradley 1734-AENTR
Allen-Bradley 1734-AENTR The Allen-Bradley 1734-AENT is a Point I/O Dual Ethernet communication module. It supports Ring, Star, and Tree Topology and transmission speed of 10/100 Mbits/s in Half or Full-Duplex mode. This module supports DIN rail mounting and requires 24 Volts DC Input Voltage.
- AB 1734-AENTR
- 1734-AENTR
- Rockwell 1734-AENTR
View More
Allen-Bradley 1734-AENT
Allen-Bradley 1734-AENT The Allen-Bradley 1734-AENT is a POINT I/O Ethernet/IP Adapter Module. It has 24 Volts DC Input Voltage Rating and a Inrush Current of 6 A max for 10 ms with the following Dimensions: 30in x 2.16in x 5.25 in. This Ethernet/IP Adapter Module has an RJ-45, Category 5 Ethernet Connector.
- AB 1734-AENT
- 1734-AENT
- Rockwell 1734-AENT
View More
Allen-Bradley 1734-ADNX
Allen-Bradley 1734-ADNX The Allen-Bradley 1734-ADNX is a Point I/O DeviceNet communication module. It enables distributed I/O implementation by allowing Point I/O modules installed to its local bus and transfer I/O data via the integrated DeviceNet interface. This module supports DIN rail mounting and requires 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This DeviceNet Adapter Module has a 1000 milliamps POINTBus Current.
- AB 1734-ADNX
- 1734-ADNX
- Rockwell 1734-ADNX
View More
Allen-Bradley 1734-ADN
Allen-Bradley 1734-ADN The Allen-Bradley 1734-ADN is a Point I/O DeviceNet communication module. It enables distributed I/O implementation by allowing Point I/O modules installed to its local bus and transfer I/O data via the integrated DeviceNet interface. This module supports DIN rail mounting and requires 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This DeviceNet Adapter Module has a 1000 milliamps POINTBus Current.
- AB 1734-ADN
- 1734-ADN
- Rockwell 1734-ADN
View More
Allen-Bradley 1734-ACNR
Allen-Bradley 1734-ACNR The Allen-Bradley 1734-ACNR is a POINT I/O ControlNet Adapter Module. It has 24 Volts DC Input Voltage and a Inrush Current of 6 amps for 10 milliseconds with an Power Requirements of 425 milliamps. This ControlNet Adapter Module has an 1000 milliamps POINTBus Current.
- AB 1734-ACNR
- 1734-ACNR
View More
Allen-Bradley 1734-8CFGDLX
Allen-Bradley 1734-8CFGDLX The Allen-Bradley 1734-8CFGDLX is a POINT I/O DC Configurable I/O Module. It has 8 Input/Outputs and an Input Voltage (Min) of 11 Volts DC with an Input Current of 2-5 milliamps. This DC Configurable I/O Module has an Open Enclosure.
- AB 1734-8CFGDLX
- 1734-8CFGDLX
View More
Allen-Bradley 1734-8CFG
Allen-Bradley 1734-8CFG The Allen-Bradley 1734-8CFG is a POINT I/O DC Configurable I/O Module. It has 8 Input/Outputs and an Input Voltage (Min) of 11 Volts DC with an Input Current of 2-5 milliamps. This DC Configurable I/O Module has an Open Enclosure.
- AB 1734-8CFG
- 1734-8CFG
View More
Allen-Bradley 1734-4IOL
Allen-Bradley 1734-4IOL The Allen-Bradley 1734-4IOL is a POINT I/O Serial Interface Module. It has a 10-28.8 volts DC Voltage Range and a Supply Current of 15mA at 24 volts DC. Additionally, this module is located in Key Switch Position 2.
- AB 1734-4IOL
- 1734-4IOL
View More
Allen-Bradley 1734-485ASC
Allen-Bradley 1734-485ASC The Allen-Bradley 1734-485ASC is a POINT I/O Serial Interface Module. It has a 10-28.8 volts DC Voltage Range and a Supply Current of 15mA at 24 volts DC. Additionally, this module is located in Key Switch Position 2.
- AB 1734-485ASC
- 1734-485ASC
View More
Allen-Bradley 1734-232ASC
Allen-Bradley 1734-232ASC The Allen-Bradley 1734-232ASC is a POINT I/O Serial Interface Module. It has a 10-28.8 volts DC Voltage Range and a Supply Current of 15mA at 24 volts DC. Additionally, this module is located in Key Switch Position 2.
- 1734-232ASC
- AB 1734-232ASC
View More
Allen-Bradley 1794-TBN AB Flex Terminal Base
Allen-Bradley 1794-TBN AB Flex Terminal Base The Allen-Bradley 1794-TBN Flex I/O Terminal Base Unit has a 1.4 Nm Terminal Screw Torque, a 250V DC/AC, 50/60Hz, 10A Supply Voltage Range max., and a 250V Cotinuous max. Isolation Voltage. It also operates with a 0.34-3.3mm^3 Wire Size and a 94x94x69 mm Dimensions.
- 1794-TBN
- AB 1794-TBN
- ROCKWELL 1794-TBN
- Flex 1794-TBN
- 1794-TBN Terminal Base
- 1794-TBNK
View More
Allen-Bradley 1794-VHSC AB Flex High Speed Counter Module
Allen-Bradley 1794-VHSC AB Flex High Speed Counter Module The Allen-Bradley 1794-VHSC Flex I/O Very High Speed Counter Module has 2 Input Channels, 2 Groups of 3 Inputs per Counter, and a 5V DC Input Voltage. It also operates with a 5mA Input On-state Current.
- 1794-VHSC
- AB 1794-VHSC
- ROCKWELL 1794-VHSC
- Flex 1794-VHSC
- 1794-VHSC Counter Module
View More