Allen Bradley suppliers,CompactLogix for sale

Allen-Bradley 1734-CTM
Allen-Bradley 1734-CTM The Allen-Bradley 1734-CTM is a POINT I/O Terminal Module. It has 250 Volts Continuous Isolation Voltage and a Field Power Supply of 1-28.8 Volts DC or 12/240 Volts AC with an Field Power Supply Current of 4 amps/module.
- AB 1734-CTM
- 1734-CTM
- Rockwell 1734-CTM
View More
Allen-Bradley 1734-ARM
Allen-Bradley 1734-ARM The Allen-Bradley 1734-ARM is a POINT I/O ARM Module. It has 75 milliamps POINTBus Current and a Thermal Dissipation of 0.375 Watts with an Power Dissipation, Max of 1.3 BTU/hour.
- AB 1734-ARM
- 1734-ARM
- Rockwell 1734-ARM
View More
Allen-Bradley 1734-APB
Allen-Bradley 1734-APB The Allen-Bradley 1734-APB is a POINT I/O PROFIBUS DP Network Adapter. It has 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This PROFIBUS DP Network Adapter has a 1000 milliamps POINTBus Current.
- AB 1734-APB
- 1734-APB
- Rockwell 1734-APB
View More
Allen-Bradley 1734-AENTR
Allen-Bradley 1734-AENTR The Allen-Bradley 1734-AENT is a Point I/O Dual Ethernet communication module. It supports Ring, Star, and Tree Topology and transmission speed of 10/100 Mbits/s in Half or Full-Duplex mode. This module supports DIN rail mounting and requires 24 Volts DC Input Voltage.
- AB 1734-AENTR
- 1734-AENTR
- Rockwell 1734-AENTR
View More
Allen-Bradley 1734-AENT
Allen-Bradley 1734-AENT The Allen-Bradley 1734-AENT is a POINT I/O Ethernet/IP Adapter Module. It has 24 Volts DC Input Voltage Rating and a Inrush Current of 6 A max for 10 ms with the following Dimensions: 30in x 2.16in x 5.25 in. This Ethernet/IP Adapter Module has an RJ-45, Category 5 Ethernet Connector.
- AB 1734-AENT
- 1734-AENT
- Rockwell 1734-AENT
View More
Allen-Bradley 1734-ADNX
Allen-Bradley 1734-ADNX The Allen-Bradley 1734-ADNX is a Point I/O DeviceNet communication module. It enables distributed I/O implementation by allowing Point I/O modules installed to its local bus and transfer I/O data via the integrated DeviceNet interface. This module supports DIN rail mounting and requires 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This DeviceNet Adapter Module has a 1000 milliamps POINTBus Current.
- AB 1734-ADNX
- 1734-ADNX
- Rockwell 1734-ADNX
View More
Allen-Bradley 1734-ADN
Allen-Bradley 1734-ADN The Allen-Bradley 1734-ADN is a Point I/O DeviceNet communication module. It enables distributed I/O implementation by allowing Point I/O modules installed to its local bus and transfer I/O data via the integrated DeviceNet interface. This module supports DIN rail mounting and requires 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This DeviceNet Adapter Module has a 1000 milliamps POINTBus Current.
- AB 1734-ADN
- 1734-ADN
- Rockwell 1734-ADN
View More
Allen-Bradley 1734-ACNR
Allen-Bradley 1734-ACNR The Allen-Bradley 1734-ACNR is a POINT I/O ControlNet Adapter Module. It has 24 Volts DC Input Voltage and a Inrush Current of 6 amps for 10 milliseconds with an Power Requirements of 425 milliamps. This ControlNet Adapter Module has an 1000 milliamps POINTBus Current.
- AB 1734-ACNR
- 1734-ACNR
View More
Allen-Bradley 1734-8CFGDLX
Allen-Bradley 1734-8CFGDLX The Allen-Bradley 1734-8CFGDLX is a POINT I/O DC Configurable I/O Module. It has 8 Input/Outputs and an Input Voltage (Min) of 11 Volts DC with an Input Current of 2-5 milliamps. This DC Configurable I/O Module has an Open Enclosure.
- AB 1734-8CFGDLX
- 1734-8CFGDLX
View More
Allen-Bradley 1734-8CFG
Allen-Bradley 1734-8CFG The Allen-Bradley 1734-8CFG is a POINT I/O DC Configurable I/O Module. It has 8 Input/Outputs and an Input Voltage (Min) of 11 Volts DC with an Input Current of 2-5 milliamps. This DC Configurable I/O Module has an Open Enclosure.
- AB 1734-8CFG
- 1734-8CFG
View More
Allen-Bradley 1734-4IOL
Allen-Bradley 1734-4IOL The Allen-Bradley 1734-4IOL is a POINT I/O Serial Interface Module. It has a 10-28.8 volts DC Voltage Range and a Supply Current of 15mA at 24 volts DC. Additionally, this module is located in Key Switch Position 2.
- AB 1734-4IOL
- 1734-4IOL
View More
Allen-Bradley 1734-485ASC
Allen-Bradley 1734-485ASC The Allen-Bradley 1734-485ASC is a POINT I/O Serial Interface Module. It has a 10-28.8 volts DC Voltage Range and a Supply Current of 15mA at 24 volts DC. Additionally, this module is located in Key Switch Position 2.
- AB 1734-485ASC
- 1734-485ASC
View More
Allen-Bradley 1734-232ASC
Allen-Bradley 1734-232ASC The Allen-Bradley 1734-232ASC is a POINT I/O Serial Interface Module. It has a 10-28.8 volts DC Voltage Range and a Supply Current of 15mA at 24 volts DC. Additionally, this module is located in Key Switch Position 2.
- 1734-232ASC
- AB 1734-232ASC
View More
Allen-Bradley 1769-L31 AB Processor Module
Allen-Bradley 1769-L31 AB Processor Module The Allen-Bradley 1769-L31 is a 1769 CompactLogix controller from the 5370 CompactLogix family. This controller has embedded 750Kbytes memory, One (1) Ethernet and One (1) RS232 communication port. It supports up to Sixteen (16) Compact I/O modules and supports up to Three (3) expansion banks. This controller is programmed and configured using RSLogix 5000 or Studio 5000 Logix Designer.
- 1769-L31
- AB 1769-L31
- Processor Module
View More
Allen-Bradley 1769-STRT10
Allen-Bradley 1769-STRT10 The Allen-Bradley 1769-STRT10 Use With: CompactLogix™ 5370 Controller
- 1769-STRT10
- AB 1769-STRT10
View More
Allen-Bradley 1769-SM2 Communication Module
Allen-Bradley 1769-SM2 Communication Module This Allen Bradley CompactLogix is a DPI/Scanport Communication Module with a Power Supply Distance Rating of 8 Modules and is programmed using RSLogix 5000.
- 1769-SM2
- AB 1769-SM2
View More